With the development of modern society, more and more people attach great importance to cleaning. As a member of the high tech in the cleaning profession, the harnessed sweeper is becoming more and more widely used. So how do we normally maintain it?
A very important driving type sweeper usual protection and maintenance operations, because we control type sweeper reasonable maintenance will be useful for extending the use of life, use the power which will impact the sweeping vehicle. In order to ensure the use of the use of control type sweeping machine, it is necessary to do the time to view the protection, then where do we pay attention to the first place?
The brush plate, the main brush and the sealing plate maintenance of the harnessed sweeper
1. to touch brush plate and the point of view, this will make the brush plate completely parallel, such power will also improve the cleaning brush.
2. side brush, brush with a long time after a bending phenomenon, with 80 degrees of boiling water, the raw material PET brush will take the initiative to rebound.
3, check the brush angle length of the brush plate regularly to ensure the high power of the washing.
4. The sealing plates around the main brush should not be damaged. If there is any breakage, a new seal should be replaced immediately.
Two. The maintenance of motor cleaning machine
1. time check whether the motor has sundries, after discovery, it is necessary to clean up clean.
2. if it is found that the motor is too long or too short, please replace it in time.
3. ensure that there are no sundries outside the motor, and the internal carbon brush should not be shorter than the regular length.
Three, the battery maintenance of the harnessed sweeper
1. time to check whether the battery's electric liquid meets the requirements (free protection in the outside), and can never lose electricity.
2. stick to the cleaning and boring machine, especially the exposed parts, such as screws, and so on.
3., after driving for a period of time, the driving type sweeper takes out several lid of the battery and checks the water in the battery of the driving sweeper. If it is found that it is necessary, it will increase the distilled water immediately.
4. battery charging in the control type sweeping machine when the electric door lock should be closed, not to charge the battery upside down, as far as possible when a full charge. In the process of charging, if the smell is smelling or the temperature of the battery is too high, the charge should be stopped and the repair should be sent when necessary. When the battery is recharged, do not touch the ends of the electrode with a wet hand or key or other metal to prevent the burn.
5. charge to prevent "deep discharge". After the use of control type sweeps, the best day to charge, do not wait for the electricity to use the light recharge.
6. use a special charger when charging. Due to the difference in battery formulation and technology, the technical requirements of charger are different. What kind of charger can be full of what brand of battery can be filled with, is not the same, so do not mix with charger.
When the 7. is not used for a long time, an electric charge should be charged every month, and the electricity in the battery should be filled after it is overflowing, and must not be stored in the state of loss of electricity.
8., if the battery is operated by a battery of water bottles, then we need to check regularly whether the electric liquid of the battery is enough. If there is a lack of electric fluid, it will also affect the power of the battery power supply and the controlled sweeper.
Four. Other matters of attention
1. every time after the use of clean body, adhere to the cleaning of the vehicle, in time to remove the dust in the car. Teach you a trick to easily remove dirt: body cannot directly remove the dirt can use a few loose perfume can easily absterge.
2. check the tightness of the brake to ensure the safety of the operation.
3, check the mechanical parts of the tight parts are loose, loose to hurry.
4, the transmission belt should be regularly checked for its tensioning to keep it at normal level.
The control type sweeping car maintenance is one of the normal operation of the key, facing some advocates of control type sweeping car maintenance is in our daily use of most of the attention, trust, if can be more careful to do in accordance with the requirements of the maintenance, steering your sweeping vehicle using his will greatly enhanced.