Cleaning machine maintenance and common problem solving methods:
The maintenance of a professional machine is very important in daily machine maintenance. This type of water operation machine needs a simple maintenance operation every day or after the completion of the cleaning mission.
1. Emptying and cleaning the sewage tank. In the process of operation, the machine draws a mixture of water containing sludge, which is very easy to accumulate in the water tank and send out unpleasant odors. So it is very necessary to clean the water tank with active water.
2, emptying clean water box, especially not every day cleaning operation time, otherwise the inactive water will become the source of bacteria and so on. Cleaning the water absorption filter network, sometimes some precipitate will occur and then weaken the drying effect. Please clean it with active water.
3. Check whether the water absorbent is clean or not; if the required water is needed to clean the glue bar and to absorb the import.
4, check the attrition of brush pan and suction pad once a week. If the ground is polished, strong pressure on the ground will damage these accessories or make them wear faster. Under normal circumstances, the brush plate can be replaced after 50 hours. Instead, when the absorbent strip is applied for 30 hours, it should replace the top and bottom flip bar (the four sides of the adhesive strip are still available).
5, a regular view of the water absorption filter network, sometimes, the filter network will be blocked by small water impurities, and then in the process of cleaning the ground, affecting the flow of water.
6, cleaning the suction pipe which connects with the water absorption; even the part of the clog will weaken the water absorption.